Huawei First to Complete 5G Network Slicing Tests

Completes China's second-phase IMT-2020 5G R&D test, including 5G New Radio (NR), massive MIMO

Huawei has completed China's second-phase 5G radio technology test in Huairou District, Beijing. During the C-Band test, Huawei adopted 5G New Radio (NR), massive MIMO and other technologies using the entire 200 MHz bandwidth to achieve over 6 Gbps of single-user downlink throughput and over 18 Gbps of cell peak rate.

This test procedure was organized by the IMT-2020 (5G) Promotion Group. What is claimed to be the world's first Huawei 5G test terminal was utilized for radio technology verification. The terminal enabled more than 100 channels of on-demand 4K ultra-high definition (UHD) video from a single 5G base station. The clarity and smooth playback in vehicle-mounted mobile scenarios demonstrated a superior experience offered by the 5G C-Band enhanced mobile broadband (eMBB).

Huawei is the first to complete 5G network slicing tests to meet diversified service requirements in three typical scenarios. Network slices provide flexible configuration with excellent cooperation between the air interface and the network, providing a more secure and differentiated user experience. An extensive range of services are available on a single network, with an air interface latency of less than 0.5 ms and over 4 million single-cell connections. Both exceed the 5G requirements specified by the International Telecommunication Union (ITU).

Huawei completed large-scale service verification, based on an actual network and service environment scenario, ahead of schedule. This is more than a key milestone of China's 5G R&D test, which also indicates a significant step forward for 5G industrialization. During the test procedures, Huawei implemented interoperability tests involving RF and interworking functions together with upstream and downstream vendors. Huawei partnered with instrument vendors (Rohde & Schwarz, Keysight Technologies, and DT Link Tester), chipset vendors (Spreadtrum Communications and MediaTek) and other companies to promote industry maturity.

Wang Zhiqin, Deputy Director of the IMT-2020 (5G) Promotion Group and the China Academy of Information and Communications Technology (CAICT) said, "The second-phase 5G R&D system verification was launched in September 2016 to promote global 5G standardization, accelerate 5G prototype development and build the 5G industry chain. This test used a set of unified equipment and test specifications for 5G-oriented typical scenarios. Thanks to proactive support from global operation, system, chipset and instrument companies, we have reached preset goals and accelerated the formation of an industry ecosystem."

Dr. Tong Wen, Huawei Fellow and Wireless Network CTO, said, "Huawei launched 5G R&D as early as 2009 and, since then, is committed to driving technological innovation and cross-industry collaboration. Huawei's 5G research achievements have been hugely validated during the second phase of the 5G test. In the future, Huawei will continuously focus on 5G R&D to promote the sound development of the 5G industry in close participation with global partners."

 

Featured Events 

Communications 2020
July 18 - 20, 2017
Las Vegas, NV

 

M2M Zone Pavilion @ MWC Americas 2017
September 12-14, 2017
San Francisco, Calif.